Filter
Top Products
13 U109200-03
Installation/Removal of the ice cube storage
tray
To remove the icebox, press the top of the drawer and
simultaneously pull the bottom, releasing the unit.
If the icebox cannot be easily fitted, remove it and turn
the corkscrew mechanism 90°. Then reinstall the icebox,
ensuring that the catch pin on the tray fits into the slot on
the shelf.
If the ice maker does not work properly
The volume of the icebox equals the quantity of ice cubes,
which the appliance can make in one day. Occasionally
small number of ice cubes may remain inside the box. If the
ice gets stuck, this will result in abnormal operation of the
ice cube maker. To avoid this problem, remove the icebox
and rearrange the ice cubes, and remove ice cubes, which
cannot be separated.
Always keep the ice cube outlet clean and
clear of obstructions.
Using the Icemaker & water dispenser
There are three options available with this accessory –
crushed ice, cool water or ice cubes. Always make sure that
you hold your glass up to the dispenser before making your
selection to avoid spillages.
Crushed ice supply
1. Hold the glass to the dispenser.
5
•
3
•
1
2. Press the button for crushed ice.
3. Slightly push the glass onto the lever switch and the
crushed ice will be dispensed into the glass.
Ice cubes
1. Hold the glass to the dispenser.
5
•
3
•
1
2. Press the button for ice cubes.
3. Slightly push the glass onto the lever switch and the ice
cubes will be dispensed into the glass.