Filter
Top Products
7
Operating Instructions
General Product Description
The SB
2
is a wall mounted, self calibrating and self filling boiling water heater. It can be used
for making cups of tea or coffee and even soups and hot snacks. A special condenser traps
steam and returns droplets to the tank, minimising waste and saving energy.
The water temperature is set and automatically maintained by the SB
2
and the unit is powered
down with the Power button. Water is dispensed by rotating the front cover knob clockwise.
How to operate the SB
2
● Make sure the electricity and water is turned on.
Refer to Fig. 6
● Use the POWER button to switch the SB
2
on and to power down. (The SB
2
should be
switched off at the mains if the water is not required e.g. at weekends, holidays, etc).
POWER light
When the SB
2
is on the POWER light will come on.
FULL light
The FULL light comes on when the tank is full of water. (The SB
2
fills up automatically and this
can take up to 10 minutes if the tank is completely empty).
TEMPERATURE READY light
The TEMPERATURE READY light comes on when the water is hot enough to use. (This can
happen even when the tank is not completely full of water).
Fig. 6