ResMed NOT014224-2 Ventilation Hood User Manual


 
19
Switching on and shutting down
4 Switching on and shutting down
4.1 Standby
When your device is connected to the mains power supply, it goes into
standby mode. The screen display shows:
The date
The time
The types of power supply: mains power supply and built-in
battery . The arrow points to the type of power supply
currently in use.
Figure 21: Standby screen.
4.2 Starting up
To start up the device:
1. Press and hold the On/Off button for
2 seconds.
2. The device will start up, then run its self-test.
3. On completion of the self-test, the device will start delivering
therapy.
4.3 Shutting down
To shut down the device, press the button for 2 seconds.
The device will go into standby mode.
Note: If you disconnect the device from the mains power supply a
continuous alarm will sound. Press the Alarm silence button
to confirm that you wish to shut down the device.
Time
Date
Mains power
Built-in battery