Filter
Top Products
-2- -3-
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions
should always be followed, including the following:
1.Read all instructions before using.
2.Do not touch hot surfaces. Use handles or knobs.
3.To protect against electrical shock, do not immerse cord, plug
or TEMPERATURE CONTROL PROBE in water or other liquid.
4.Close supervision is necessary when any appliance is used near
children. This appliance is not to be used by children.
5.Unplug from outlet when not in use and before cleaning the
appliance. Allow to cool before putting on or taking off parts,
and before cleaning.
6.Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or has been damaged in any
manner. Return appliance to the manufacturer (see warranty)
for examination, repair, or adjustment.
7.The use of accessory attachments not recommended by
manufacturer may cause injuries.
8.Do not use outdoors.
9.Do not let cord hang over edge of table or counter, or touch
heated surfaces.
10.Do not place on or near a hot gas or electric burner, or in a
heated oven.
11.Extreme caution must be used when moving appliance
containing hot oil or other hot liquids.
12.Always attach TEMPERATURE CONTROL PROBE to appliance
first, then plug cord in the wall outlet. To disconnect, turn
TEMPERATURE CONTROL DIAL to “OFF”, then remove plug
from wall.
13.Do not use appliance for other than intended use.
This appliance is for HOUSEHOLD USE ONLY. No user-serviceable
parts inside. Do not attempt to service this product. A short power
supply cord is provided to reduce the hazards resulting from
entanglement or tripping over a long cord. An extension cord may
be used with care. However, the marked electrical rating should be
at least as great as the electrical rating of the skillet. The extension
cord should not be allowed to drape over the counter or tabletop
where it can be pulled on by children or tripped over unintentionally.
Keep Warm Setting
The temperature control probe has a “Keep Warm” range setting of
approximately 150°F to 180°F. The indicator light will cycle on and
off when this setting is in use to indicate that the skillet is
maintaining the desired temperature.
IMPORTANT
Check the HANDLES/LEGS of your skillet periodically for looseness.
If needed, re-tighten with a screwdriver. CAUTION: Overtightening
can result in stripping of screws or cracking of handles and base.
POLARIZED PLUG
This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of
electric shock, this plug will fit into a polarized
outlet only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not attempt to modify the
plug in any way. If the plug fits loosely into the AC outlet or if
the AC outlet feels warm do not use that outlet.
SAVE THESE INSTRUCTIONS
S11P-RevA.qxd:S11P_07EM1 V.qxd 4/23/09 11:52 AM Page 2