Filter
Top Products
Lift-up cooktop
the support rods lock into place.
Personal Injury Hazard
Be sure both support rods are fully
extended and in the locked position.
Failure to do so could result in per-
sonal injury from the cooktop acciden-
tally falling.
1.
Remove
surface burner grates.
2.
Lift
front of cooktop at both front corners until
Product Damage Hazard
Do not drop the cooktop.
Damage couM result to the porcelain
and the cooktop frame.
3.
Wipe
with
warm,
soapy water.
Use
a soapy
steel-wool pad on heavily soiled areas.
4.
To lower the cooktop, lift
ccoktop from both
sides while pressing the support rods back to
unlock them.
Lower
the cooktop into place.
Replace surface
burner grates.
Surface burners
1. Lift up
the cooktop, following the instructions
above.
2. Before cleaning, remove
screws that
hold each of the burners in place. The
screws prevent the burners from moving
during shipment.
Remove
the shipping
screw with a Phillips screwdriver,
lift
the
burner up,
tilt it
to one side at the end
closest to the ignitor and
move
it toward
the back of the range. This separates the
burner from the gas valve at the front of
the range, so it can be easily removed.
3.
Wipe
off surface burners with warm, soapy
water and a sponge after each use.
To
remove
cooked-on food, soak
the burners
in a vinegar and water solution for 20-30
minutes.
Scrub
with a plastic scrubbing pad.
17