Roper RT18DK Refrigerator User Manual


 
5. Remove both handle assemblies as
shown. Keep all parts together.
Remove hole plugs from opposite side
of doors. Reinstall handles on new side.
Seal all original holes with hole plugs
from new side.
MODEL RT18DK
w
Freezer
handle
II
Refrigerator
handle -
?’
I
M
MODEL RT18EK
6. Using a putty knife, remove the black
plug from the front of the cabinet base
(new hinge side) and reinstall it in the old
set of lower hinge holes.
7. Reinstall the bottom hinge assembly in
the new side. Do not tighten the screws.
The hinge must remain loose against the
cabinet for easier alignment.
6. Lii the refrigerator door up onto the
bottom hinge assembly. Hold door in
place while reinstalling center hinge
assembly.
9. Level refrigerator door while holding door
against front of cabinet. After leveling,
tighten bottom and center hinge screws.
10. Remove screws (or plugs) from the
hinge holes in the top of the cabinet and
reinstall them in the opposite side.
11. Remove plug from upper bearing of
freezer door and reinstall on opposite
side.
r--
/--------I
D
12. Lii freezer door up onto the center
hinge assembly. Reinstall top hinge
assembly while holding door in place.
Do not tighten the screws.
13. Align the doors so they are parallel to
each other. Adjust doors to cabinet so
the gasket seals but does not bind.
14. Tighten all hinge screws.
14
WITH QUE8TIONI OR COMMENTS