Roper RT18DK Refrigerator User Manual


 
Installing it properly
1. Allow I% inch (1.25 cm) air space on each
side of the refrigerator for ease of installa-
tion.
2. Allow 1 inch (2.5 cm) air space behind
and 3 inches (7.5 cm) air space ahove
the refrigerator for proper circulation.
3. If instalting the refrigerator with the hinge
side against a wall, you might want to
leave extra space so the door can he
opened wider.
4. Make sure the fbor below the refrigerator
is level and strong enough to support a
fully-loaded refrigerator.
Leveling it
Model RT18DK
Your refrigerator has 2 front leveling
screws - one on the right and one on the
left. To adjust one or both of these, follow
the directions below.
1. Open refrigerator door.
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4. Check with level.
5. Close refrigerator door.
Model RTlSEK
Your refrigerator has 2 front leveling legs -
one on the right and one on the left. To
adjust one or both of these, follow the
directions Mow.
1. Cpen the refrigerator door.
2. Tilt refrigerator back slightly.
3. Turn leveling leg to adjust height.
4. Replace refrigerator on floor.
5. Check with level.
6. Close refrigerator door.
Right to rake;
I
left to lower
Lower
N
redrigenator
wer
refrigerator
rigemtor
Turn leveling
leg to adjuei
WITH QUESTIONS OR COYYENT6