Filter
Top Products
Removing the meat drawer and cover
(Model RTISDK only)
Remove the meat drawer and cover for
easier cleaning.
To remove the meat drawer:
1. Slide meat drawer out to the stop.
2. Lift the front slightly.
3. Slide meat drawer out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Remove the meat drawer.
2. Tilt front of cover up.
3. Pull cover up and out.
To replace the cover:
1. Fit bottom notches of cover over rear and
center cross bars of shelf.
2. Lower cover into place.
3. Replace the meat drawer.
Lift the front, then
the back.
Pull out to the
stop, lift the front,
and pull again.
Removing the crispers and crisper cover
(Model RTl8DK only)
Use your crispers to store fruit and veg-
etables.
To remove the crispers:
1.
Slide crisper out to the stop.
2. Lift the front.
Lift the front, then
the back.
3. Slide out the rest of the way.
4. Replace in reverse order.
To remove the cover:
1. Lift the front, then the back.
2. Pull cover up and out of cabinet.
cover carefully.
To replace the cover:
1. Fit rear cover notches into nubs on rear
of refrigerator walls.
2. Lower front of cover into place.
Pull out to the stop, lift the
front, and pull again.