Russell Hobbs RHM2017 Microwave Oven User Manual


 
11
Your microwave Oven is equipped with a clock, you must set the clock when you first install your oven or after a power failure.
1. In standby mode, press button repeatedly to set the clock in 12 or 24 hour cycle.
2. Turn to indicate the hour digit.
3. Press once.
4. Turn to adjust the minute.
5. Finally, press and the time will be set.
For example: Set the current time to 8:30 .
1. Press once and it will display “12H” and
is flashing
2. Press again and it will display “24H” and
is flashing.
3. Select the clock in 12 Hr or 24 Hr and adjust the hour until it displays “8:00”.
is flashing.
4. Press again, it displays “8:00”,
is flashing.
5. Turn to adjust the minute until it displays 8:30 and
will flash.
6. Press once to confirm the setting and “:” is flashing.
Note: You can press the button once to check clock time during cooking.
MICROWAVE COOKING
To cook with microwave, time and power level should be set. The longest cooking time to be set by touching the
number pads is 60 min.
1. Press to select the microwave cooking and the display shows ”100”
& .
2. Continue to press to select the required microwave power level until the required power setting is reached.
3. Turn to adjust the cooking time until the required time is reached and
is flashing.
4. Press to start the cooking.
Example: Setting cooking time of 20 minutes on power 80%
7. Press button twice and the display shows 80
& .
8. Turn clockwise to adjust the cooking time to 20:00 and
is flashing.
9. Press to start cooking.
When the cooking is finished, the oven will display END and beep every two minutes until the oven door is opened or
any button is pressed.
Time/ Weight
Clock
Clock
Clock
Clock
Clock
Clock
Power
Power
l
Power
Time/ Weight
Clock
Time/ Weight
Clock
Start/
Quick Start
Time/ Weight
Start/
Quick Start
Time/ Weight
SETTING THE CLOCK