Russell Hobbs RHM2030 Microwave Oven User Manual


 
For Customer Services & Spare Parts please call 01204 664 084 Opening times: Monday – Friday 9am – 5pm
Operating instructions
Connect the main plug into a suitable 13amp mains socket, make sure the voltage is the same
as on the rating label (do not use extension cables or mains adaptors).
Each time a button is pressed, a beep will sound to acknowledge the press.
After a cooking program finish, the system will sound beeps with END on display. And the beeps
will continue to sound every two minutes automatically until the door is opened or
PAUSE/CANCEL button is pressed, the system return to standby mode.
SETTING
THE
CLOCK
With the oven ready for input, press the CLOCK/PRESET button once or twice to set the digital
clock in 12 or 24 hours cycle.
For example: If you want to set the oven clock time to 8:30.
1. Press CLOCK/PRESET button once or twice.
2. Turn MENU/TIME/WEIGHT dial to indicate 8:00. And the LED displays “800”and “
“ 00”flash.
3. Press CLOCK/PRESET button once.
4. Turn MENU/TIME/WEIGHT dial to indicate the minute digits until the screen shows 8:
30 and “
”.
5. Press CLOCK/PRESET button once to confirm the setting.
NOTE: You can press the CLOCK/PRESET button once to check clock time during cooking.
MICROWAVE COOKING
To cook with microwave power alone, press the POWER LEVEL button a number of times to
select a cooking power level, and then use the MENU/TIME/WEIGHT dial to set a desired
cooking time. The longest cooking time is 95 minutes.
Select power level by pressing the POWER LEVEL button:
Press POWER
LEVEL button
Cooking
power
Display
Once 100%
“1S”
” ”100", %
Twice 80%
“1S”
” “100", %
3 times 60%
“1S”
” “100", %
4 times 40%
“1S”
” “100", %
5 times 20%
“1S”
” “100", %
For example, suppose you want to cook for 5 minutes at 60% of microwave power.
1. Press POWER LEVEL button repeatedly to select power level.
2. Turn MENU/TIME/WEIGHT to show 5:00.
3. Press START/QUICK START button.
Note: During cooking, you can check the present cooking power by pressing POWER LEVEL
button.