Filter
Top Products
Using the machine
Switching on the machine
To switch on the machine, press the ‘On/Off’ button
Selecting a programme
.
Monitoring your wash cycle
Changing a programme
Resetting during a cycle
To reset the machine during a cycle to allow you to reselect a programme from the
start, press the ‘Play/Pause’ button once. Twist the programme knob to the ‘Reset’
position. Press the ‘Play/Pause’ button once and wait 30 seconds for the water to be
drained from the machine. Once the finish light is illuminated (lower LED bulb), you
can reselect a new cycle.
To select a programme, twist the programme knob to
the desired position
You can monitor the progress of the wash cycle by
using the programme follow up bulbs. While the
programme is running, the top light will illuminate. Once
the programme has finished, the bottom light will
illuminate.
To reselect a programme during a cycle, press the play/pause button once. Wait until
you hear the cycle has stopped. This will allow you to reselect a different cycle using
the instructions above. The cycle will continue from the point it was stopped at but will
continue as the new selected cycle.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-20-