filter and line up the corresponding markings. Lock the micro filter into the
metal/plastic filter and turn in the direction of the arrow (4) .
- Never use the dishwasher without the filter present. Incorrectly fitting the filter will
reduce the washing effectiveness of the machine.
Spray arms
Always check the spray arm water outlet to ensure they are
not clogged. If these are clogged, ensure they are cleaned.
The lower spray arm can be removed by pulling it upwards,
while the upper spray arm nut can be removed by turning
the nut to the left. Ensure the nut is tightened sufficiently
when refitting the upper spray arm.
Hose filter
The inlet hose contains a filter to prevent potential water debris entering the
machine. Check the filter hose from time to time and clean if necessary. To clean the
filter, first turn the tap off and then remove the hose. After removing the filter from the
hose, clean this under the tap. Insert the cleaned filter back into its place inside the
hose and refit the hose.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 01204 664 084
-23-