Filter
Top Products
9
ENGLISH
9
2
Press the “ ” button to start the cycle. The machine starts the auto-
matic priming of the circuit by dispensing some water through the
Classic Milk Frother.
Yellow
3
The bar under the icon shows the operation progress. When the pro-
cess is completed, the machine stops dispensing automatically.
Yellow
4
Then the control panel shows the machine warm-up icon.
Automatic Rinse/Self-Cleaning Cycle
When warm-up is complete, the machine automatically performs a rinse/
self-cleaning cycle of the internal circuit with fresh water. This takes less
than a minute.
1
Place a container under the dispensing spout to catch the small
amount of dispensed water.
2
The machine shows this display. Wait for the cycle to nish automati-
cally.
Note:
You can stop dispensing by pressing the “
” button.
YellowGreen
3
When the above steps are complete, the machine shows this display.
You can now perform the manual rinse cycle.
Yellow