Filter
Top Products
11
ENGLISH
11
Green Red Red
7
Press the “ ” button. The machine shows this display.
9
Dispense water until the no water icon appears.
Note:
You can interrupt the manual rinsing by pressing the “
” button. To
restart press the “
”button and then the “ ” button.
10
Fill the water tank again up to the MAX level. Now the machine is ready
for co ee brewing.
The display to the left will be shown.
Note:
When the machine has not been operated for at least two weeks, it will
automatically perform a start-up rinse/self-cleaning cycle. Following this,
you need to initiate a manual rinse cycle as described above.
The automatic rinse/self-cleaning cycle starts automatically when the ma-
chine has been in stand-by mode or switched o for more than 15 minutes.
At the end of the cycle, it is possible to brew a co ee.
8
Press the “ ” button to start dispensing hot water.