Filter
Top Products
• 20 •• 20 •
Red
• The icon indicates that the tank must
be rinsed and lled.
Red
• The machine carries out the second
rinse cycle of the descaling solution.
Wait until the end of the dispensing
cycle.
Red
• After inserting the water-filled tank
in the machine, turn the selector dial
clockwise to the "
" position.
Water is dispensed from the steam wand
for the second rinse cycle.
Red
• At the end of the second rinse cycle,
turn the selector dial back to the "
"
position.
• Remove and empty the containers used
to collect the rinsing water.
Rinse the water tank thoroughly
and ll it again with fresh drinking
water up to the MAX level. Place
the tank in the co ee machine.
• Place a container under the steam wand
and another one under the dispensing
spout.
Red
• When the second dispensing
is complete, turn the selector dial
clockwise to the "
" position to
continue the rinse cycle through the
steam wand.
Red
• Once this very rst phase is over, the
icon on the side is displayed prompting
the user to set the selector dial back to
the "
" position.
The machine performs the rinse cycle
dispensing water directly from the
dispensing spout.
Red
• When inserting the water- lled tank
in the machine, the icon on the side
is displayed; turn the selector dial
clockwise to the "
" position.
Red
• The machine performs a fast rinse cycle.
Red
• When the water in the tank is nished,
the icon on the side is displayed to
indicate that the selector dial must be
brought back to the “
” position.
• Empty the containers used to collect the
liquid dispensed by the machine.