Filter
Top Products
ENGLISH
13
PROGRAMMING
START
Switch off the machine to
access the programming
mode.
Press the buttons together. While the buttons are pressed,
switch on the machine.
On the control panel, the
indicator lights corres-
ponding to the functions
activated will light up.
If you wish to exit, switch
the machine off and then
on again.
PROGRAMMING MACHINE FUNCTIONS
The user can change some machine operating parameters to suit his/her personal needs.
With the pre-brewing process the coffee is slightly
moistened before actual brewing. This brings out the full
aroma of the coffee and lends it an excellent avour. It is
possible to choose either “enabled” or “disabled”.
With the pre-grinding process the machine grinds twice: the
rst time for the type of coffee selected and the second time
for the subsequent coffee (not yet selected).
This function is useful when you want to reduce the time
necessary for dispensing several coffees in sequence (e.g.
while entertaining guests or during a party).
Light on
Prebrewing = On
PREBREWING
PREGRINDING
The function is enabled by
pressing the button
Light off
Prebrewing = Off
Light on
Pregrinding = On
The function is enabled by
pressing the button
Light off
Pregrinding = Off