Filter
Top Products
14
PROGRAMMING MACHINE FUNCTIONS
Dip the strip in water for 1
second.
WATER HARDNESS
The appliance is factory set on a hardness value of 3. The setting should be adjusted according
to the level of water hardness in the local area.
The hardness of tap water may vary depending on the region. For this reason, the appliance
can be set according to the water hardness in the place where it is to be used, expressed
on a scale of 1 to 4.
Press the button to set the
hardness measured with
the strip.
If 1 square changed colour,
set:
Check how many squares
change colour.
If 3 squares changed
colour, set:
If 4 squares changed
colour, set:
If 2 squares changed
colour, set: