Filter
Top Products
GROUNDED PLUG
To reduce the risk of electric shock this appliance has a grounded plug
(2 blades and 1 pin). If the plug does not fit fully into the electrical outlet
contact a qualified electrician.
DO NOT modify the plug in any way or use
an adaptor.
DESCRIPTION OF PARTS
1. Safety Locking Pin
2. Filler Cap
3. Lid
4. Glass Blender Jar
5. Cutting Blade Assembly
6. Jar Base
7.
Safety Lock Release Button
8. Safety Locking Pin Slot
9. Safety Locking Handle
10. Blender Base
11. Control panel
a) Pulse/Ice Crush
b) Hi
c) Low
d) Off
BEFORE FIRST USE
1. Read all instructions carefully and keep them for future reference.
2. Remove all packaging.
3. Press the Safety Lock/Release button. Gently push the handle backwards.
4. Lift the Blender Jar upwards (do not twist or turn). Wash the Blender
Jar, Lid and Filler Cap in warm soapy water. NOTE: For safety purposes
the Cutting Blade Assembly is designed so it cannot be removed from
the Blender Jar.
IMPORTANT: Use extreme caution when cleaning
Blender Jar by hand as the blades are very sharp.
5. Rinse, dry and reassemble making sure that the handle of the Blender
Jar is aligned with the right edge of the Blender Base.
3
8
7
1
2
3
4
6
5
11c
11b
11a
10
9
11d
SAL7-585 Booklet Blender Salton BL-1051 _EN VF.qxd 03/08/07 17:19 Page 3