Filter
Top Products
Clean Your
Juicer
Thoroughly
Before Retiring
For The Day
PLEASE NOTE:
CLEANING YOUR JUICER
10
• Unplug from outlet before assembling or removing parts and
before cleaning.
Do not immerse the Motor Base in water or spray it with water.
Clean only by wiping with a damp sponge, cloth, or paper towel.
Use any liquid dishwashing detergent but do not use any products
containing ammonia or scouring powders. These products will
dull, scratch or mar the plastic surface.
• All parts (except the Motor Base) are washable in warm, soapy
water. Follow DISASSEMBLY INSTRUCTIONS. To clean the
Juicer Lid and Juice Bowl, we recommend using a fruit and
vegetable brush with natural fibers.
DO NOT USE A METAL BRUSH OR PAD.
• When cleaning the Blade Basket, use the brush to make sure
the tiny holes in the Basket are not clogged. This can be
accomplished by holding the Blade Basket under a running
faucet while brushing the Basket holes from both inside and
outside the Blade Basket.
•Occasionally, the Juice Bowl, Juicer Lid, and Blade Basket may
be washed in a dishwasher, only if they are placed on the top
shelf of the dishwasher. However, washing with ordinary warm
(not hot) tap water on a daily basis should be sufficient.
• Sponge off the Motor Base and the legs underneath if any juice
has spilled under the Juicer. Use a damp toothbrush or cloth to
clean juice from inside the Hub on top of the Motor Base.
Juicer should be air-dried only!
Due to the powerful staining properties of the carotenoids that are
found in many vegetables, especially carrots, we suggest the
following cleaning procedures:
• Stained parts may be soaked overnight in any of these solutions:
(1) biodegradable soap in enough warm water to cover Juicer
parts, (2) 1/4 cup bleach added to a sink full of warm water,
(3) 1 part warm water to 1 part cider vinegar or (4) 1/2 small
box baking soda in enough warm water to cover parts.
• Never use ammonia or abrasives.
• Lightly scrub with soft bristle brush and liquid detergent
after soaking.
• NEVER SUBMERGE THE MOTOR BASE IN WATER OR OTHER LIQUID!
CONTROL PANEL
Your Juiceman® JM418SS has a unique control panel, offering two speed options:
HIGH or LOW. These two speeds ensure optimal rpm to provide maximum juicing
efficiency (efficiency describes the amount of juice extracted from your produce).
HIGH SPEED
Best for harder produce, such as carrots, beets, and
pineapple (with rind). Also recommended for leafy or stringy
produce such as celery and greens.
LOW SPEED
Best for softer produce such as citrus, apples, grapes (with
stems), melons, peaches (remove pit), and tomatoes. Also
recommended for ripe produce that has become soft.
OFF
Press this Button to pause or turn your Juiceman®
JM418SS OFF.
BEFORE USING THE JUICEMAN
®
JM418SS
The Juiceman® JM418SS comes almost completely assembled in the box. We
suggest taking it apart and washing the removable parts in warm water with a
biodegradable, non-abrasive liquid detergent before the first use. This will eliminate
any traces of dust or residue from manufacturing or shipping.
NOTE: Your Juicer may be shipped with a protective cardboard insert between the
Feed Tube and Cutter Blade (on the Blade Basket). Remove this and any other
protective packaging before using your Juicer.
CAUTION: Never rinse or immerse the Motor Base in water or any
other liquid.
NOTE: Refer to the Fresh Juice Recipes & Menu Planner for juice recipes, pulp
recipes, sample menus, and tips on buying, cleaning and storing.
• Make sure the Blade Basket is securely seated and the Pulp Basket is at the rear
of the Juicer, ready to catch pulp. To save cleaning time, line the Pulp Basket
with a plastic produce bag (the kind you put your produce in at the grocery
store).
• Place a glass underneath the Juice Spout.
• Read assembly and disassembly directions. Make sure the Juicer is properly and
completely assembled. The Juicer will not turn on unless properly assembled.
5
HIGH
LOW
OFF