Filter
Top Products
1. Before first use, see Cleaning Instructions and Hints For Care and
Use of Non-Stick Surface.
2. Insert drip tray into rails under Griddle, positioned directly
under the grease drain.
3. Turn temperature control knob on probe to OFF position and
attach securely in place.
4. Coat the non-stick surface with vegetable shortening before
heating. If necessary, remove excess oil with paper towel.
Plug into 120V AC outlet. Align the pointer to the proper
temperature on temperature control knob. The light on the probe
will illuminate. The unit is preheated when the light on the probe
goes off. The light will cycle on and off during use, indicating the
proper temperature is being maintained.
5. When cooking is finished, turn temperature control knob on
control probe to OFF position, unplug from outlet and cool
before cleaning.
CAUTION: Because some countertop finishes are more affected
by heat than others, use care not to place Griddle on surfaces
where heat may cause a problem.
CAUTION: Griddle surfaces are hot during use.
MAXGW1 Use and Care Guide3.
Using Your Cool-Edge Griddle
PRODUCT MAY VARY SLIGHTLY FROM ILLUSTRATIONS
Cool-
Edge
Drip Tray
(P/N 21697)
Temperature
Control Probe
(P/N 21698)
Non-Stick
Griddle
Surface
Grease
Drain
Non-Skid
Rubber Feet
(P/N 21700)
Grease
Channels
Spatula
(P/N 21699)