Filter
Top Products
12
REPLACING INTERIOR LIGHTS
Unscrew the cover with a Philips-head screwdriver.
Always unplug the appliance from the power supply first before replacing the fridge light. Otherwise,
there is the danger of electric shock.
- Incandescent light
• Turn the interior light to remove and replace it with a new one.
• 30 watt light bulb with E17 base socket
Screw the cover back on.
Raise the hanging sill under the light bulb cover upward by pressing on it and pulling it towards you.
After removing the light bulb, replace it with a new bulb by turning it in the direction of the arrow.
• The new bulb's watt and voltage must be the same as stated on the type plate.
• 15 watt light bulb with E17 base socket
Insert the lower hanging sill after fitting the upper part of the light bulb cover.
Note
Replacement bulbs for both the freezer and refrigerator are available at retail outlets such as
Wal-mart, The Home Depot and CAMCO Service.
Use replacement bulb size E17, maximum 30 watt in refrigerator or 15 watt in freezer.
Warning
FRIDGE LIGHT BULB
FREEZER LIGHT BULB