Filter
Top Products
16
REVERSING THE DOOR SWING
Read these instructions completely and carefully
12. Disassemble the switch by gently prying from the
corner. Be careful not to scratch.
14. Re-install parts in their opposing sides.
Assemble the Door S/W as it is. (Make sure
not to insert it upside down)
15. Assemble Freezer Door by fitting the lower
hinge into the hinge grommet hole. Be sure to
grease the washer.
16. Fix the Alternate Middle Hinge into the door hole.
Door switchDoor switch
13. Disassemble the Door Cap, Sleeve and the
screws.
Door CapDoor Cap
SleeveSleeve
WasherWasher
Alternate
Middle Hinge
Alternate
Middle Hinge
11. Move the hardware found on the right side of the
door to the left and vice-versa.