Samsung RB195ZA** Refrigerator User Manual


 
14
REVERSING THE DOOR SWING
Read these instructions completely and carefully
- IMPORTANT NOTES
- TOOLS YOU WILL NEED
- DISASSEMBLY OF THE FRIDGE DOOR
Unplug the refrigerator from its electrical outlet.
Empty all door guards / racks.
1. After removing the screw, disassemble the Upper
Right Hinge Cover.
3. With the 7/16 inch wrench, remove the four
bolts that hold the top of the refrigerator.
2. Disconnect electric wire on the top of the refrigerator.
Warning
1. If you want to change the door direction, call 1-800-SAMSUNG.
2. Read the instructions carefully before starting.
3. Handle parts carefully to avoid scratching paint.
4. Set screws down by their related parts to avoid using them in the wrong places.
5. Provide a non-scratching work surface for the doors. (ex : blanket)
6. During door reversing, refrigerator should not be stained with oil.
Philips head screwdriver 7/16" inch wrench
- ADDITIONAL PARTS
Middle hinge Screw
Compression
Fitting
Compression
Nut
Hinge Cover
4. Separate Hinge from electric wire as shown
below.