Filter
Top Products
cleaning & care_19
DOOR REMOVAL
For normal use, the oven door must not be removed but if removal is necessary, for example, for
cleaning purposes, follow these instructions.
CAUTION: The oven door is heavy.
1. Open the door and flip open the
clips at both hinges completely.
2. Close the door by approximately 70°. With both
hands, grasp the sides of the oven door at its
middle and pull-lift until the hinges can be taken
out.
ATTACHING: Repeat steps 1 and 2 in reverse order.
DOOR GLASS REMOVAL
The oven door is equipped with three sheets of glass placed against each other. These sheets can
be removed for cleaning.
1. Remove the two screws
on the left and right sides
of the door.
2. Detach the covering and
remove glass 1 from the
door.
3. Lift glass 2 and remove
the two holder glass
rubber from the top of the
sheet, then remove glass
3. Clean the sheets with
warm water or washing-
up liquid and polish dry
them with a soft clean
cloth.
ATTACHING: Repeat steps 1, 2 and 3 in reverse order.
The Door-Glass is different from 2EA to 4EA model by model.
When assembly the inner glass 1, put printing to direction below.
CLEANING & CARE
70
2
1
BT621-Series_XSA-00157K-01_EN.indd 19 2008-04-21 ｿﾀﾈﾄ 2:16:54