Filter
Top Products
12
EN
Hob Use (Continued)
• Always position pots and pans before switching on the cooking zone.
• Dirty cooking zones and pan bases increase power consumption.
•
When possible, position the lids rmly on the pots and pans to cover completely.
•
Switch the cooking zones off before the end of the cooking time to use the residual heat
for keeping foods warm or for thawing.
• The base of the pan should be the same size as the cooking zone.
•
Using a pressure cooker reduces cooking times by up to 50 %
Using the touch control sensors
To operate the touch control sensors, touch the desired panel with the tip of your pointed
nger until the relevant displays illuminate or go out, or until the desired function is
activated.
Ensure that you are touching only one sensor panel when operating the appliance. If your
nger is too at on the panel, an adjacent sensor may be actuated as well.
C21RJAN_XSA-00144A_EN.indd 12 2008-10-07 5:01:17