GB
S
AMSUNG ELECTRONICS
15
The Hold Timer can be used in two different ways:
◆ As a simple cooking timer
◆ To set a standing time for defrosting.
☛
As a simple cooking timer.
☛
To set the standing time during defrosting, see page 25.
Setting a Standing Time
1 Press the button.
Stopping the Cooking
You can stop cooking at any time to check the food.
☛
You can also cancel any setting before starting by simply pressing Cancel .
1 To stop temporarily;
Open the door.
Result: Cooking stops. To resume cooking, close the door and press again.
2 To stop completely;
Press the button.
Result: The cooking stops.
If you wish to cancel the cooking settings, press the button again.
Adjusting the Cooking Time
You can increase the cooking time by pressing the +30s button once for each
30 seconds to be added.
Press the +30s button once for each 30 seconds to be added.
2 Select the required time by pressing the 10min, 1min, and 10s buttons.
3 Press the button.
Result: The oven beeps four times when the standing time is over.
bCE2D33/2933(GB2) 2/1/00 6:23 AM Page 15