Filter
Top Products
10
MICROWAVE OVEN INSTALLATION REQUIREMENTS
M
ICROWAVE
O
VEN
I
NSTALLATION
R
EQUIREMENTS
Connecting the Power Cables to the Oven
• Install the power cable clamp required for the battery connection to the connection power cable. Do not
connect the power cable to the battery yet.
• Bring the power cable close to the oven.
• Strip about 20mm of electric coating off the power cable wire.
• Be careful not to damage the wire.
• Remove the plastic cover from the back of the oven.
• Attach the positive power cable (Battery +) to the red right insulating terminal on the oven.
• Attach the negative power cable (Battery -) to the left terminal.
• Connect the positive power cable (Battery +) to the battery first. Then, connect the negative power
cable(Battery -) to the battery.
• Replace the plastic cover.
• In case of uninstalling the power cable, do it in exactly reverse order.
Battery Power Consumption for proper
operation
Microwave oven will operate continuously for a
maximum of 30 minutes of the battery.
The battery life is subject to various conditions such
as battery operating hours, battery charging status,
ambient temperature, etc.
Power Cable Size: 22mm (4AWG)
Wire Total Length : MAX. 3m
Red color
Black color
+
+
-
(Fig.1)
Battery Capacity 12V 90Ah
Battery+
Plastic cover
(Terminal
post cover)
Battery-
+
(Fig.2)
7711-body.auto.fm Page 10 Tuesday, August 24, 2004 1:52 PM