Filter
Top Products
8
MICROWAVE OVEN INSTALLATION REQUIREMENTS
M
ICROWAVE
O
VEN
I
NSTALLATION
R
EQUIREMENTS
Installation(Continued)
To make a hole in an accurate location, create a
mark in advance with a hammer and punch.
Smooth any rough edges on the holes and apply
rust proof treatment to them.
• Remove one screw securing outer panel of
microwave oven (Right side)
• Attach left and right brackets to the outer panel
using 8 screws(Fig.1)
• Secure the microwave oven brackets to the
frame which has drilled holes(Ø 4.0~4.2) using
6 screws (Tap Screws).(Fig.2)
• Fig.3 shows how the microwave should look
attached to the frame.
If the electrical wiring does not work after the oven
is fastened tightly, first follow the “Electrical Wiring
(Page 9-10)” instructions and then re-fasten the
oven.
The oven must be fastened tightly to protect
against vibration.
If do not want to use brackets, please attach 8
screws (#4x12) on left and right side of the outer
panel directly.(Fig.4)
D
E
7
7
1
1
D
E
7
7
1
1
D
E
7
7
1
1
D
E
7
7
1
1
7711-body.auto.fm Page 8 Tuesday, August 24, 2004 1:52 PM