Filter
Top Products
02 INDUCTION COOKING
Surface cooking _19
INDUCTION TOUCH CONTROL
2 14
5
6
3
1. POWER ON/OFF CONTROL SENSOR
2. LOCK
3. COOKING ZONE SELECTORS
4. HEAT LEVEL SETTING SELECTORS
a. -,+,Slide
b. Simmer
c. Boost
5. BURNER OFF
6. INDICATIONS FOR
a. Heat Setting (Lo~Hi)
b. Simmer (Si)
c. Boost (P)
d. Hot Surface (H)
• Power Boost
: Use this function to heat up the contents of the pan faster than
maximum power level ‘ ’. ( The display will show ‘ ’ )
• Digital displays: The four display fields are assigned to the four cooking zones.
They show the following information:
- the appliance has been switched on
- ,
to , ,
,
selected heat level settings
- residual heat
- the child lock is activated
- error message, the sensor has been touched for longer than 10 seconds.
ex) control touch is partially covered by a damp cloth or liquid has boiled over.
To reset, touch the On/Off control
- error message, when the Induction cooktop is overheated because of abnormal
operation. (example : operation with empty cookware)
-
error message, cookware is unsuitable or too small or no cookware has been placed
on the cooking zone.
USING THE TOUCH CONTROL SENSORS
To operate the touch control sensors, touch the desired panel with the tip of your pointed finger
until the relevant displays illuminate or go out, or until the desired function is activated. Ensure that
you are touching only one sensor panel when operating the appliance. If your finger is too flat on
the panel, an adjacent sensor may be activated as well.
FTQ307NWGX_XAC DG68-00229A.indb 19 2009-07-13 1:30:40