Filter
Top Products
27_ Operating the oven
SETTING THE CLOCK
The clock must be set to the correct time of day for the automatic oven timing functions to work
properly.
• The time of day cannot be changed during a timed cooking, a delay-timed cooking or a self-
cleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1. Start the setup.
Press the CLOCK pad.
2. Enter the present time.
Enter the current time in hours and minutes on the number pad,
eg. 1,3,0 for 1:30
3. Exit the set up.
Press the START/SET or CLOCK pad.
How to change between a 12-hour and 24-hour display
1. Start the setup.
Press CLOCK and 0 on the number pad at the same time for 3
seconds.
The display will show the present mode (eg. 12 hour).
2. Select the display mode you want.
Press 0 on the number pad to select 12 hour or 24 hour.
Pressing 0 on the number pad changes the displayfrom 12 hour to
24 hour and back again.
3. Exit the set up.
Press the START/SET pad.
NE595R1ABSR_AA_DG68-00432A-03_EN.indd 27 2013-05-23 �� 5:23:58