Filter
Top Products
3. After opening the Freezer door,
lift the drawer box.
4. Remove 4 hex head bolts
from both sides with a socket
wrench(10mm)
1. Separate the Cap on the Middle
Hinge.
2. Remove the screw attached to the left and right middle hinges with a
philips screwdriver(+).
Remove the 2 hex head bolts attached to the left and right middle
hinges with an allen wrench(3/16”).
Middle Hinge
3. Remove the Middle Hinge
connected to the Freezer.
4. Lift up the freezer door from the
hinge.
Be careful not to drop and
scratch the freezer door.
5. Lift up the freezer door from the
rails.
Be careful not to drop and
scratch the freezer door.
5. Insert the left upper hinge shaft
into the hole on the corner of the
fridge door.
8. Connect the electronic wire on
the top of the refrigerator.
6. Insert the upper hinges into the holes
at the top of the door.
Insert and tighten the 3 hex head
bolts into the left and right upper
hinges with a socket wrench.
9. Position the top table in place.
Insert and tighten the 3 screws
into the top table with a philips
screwdriver(+).
7. Insert and tighten the ground
screw into the left and right
upper hinges with a philips
screwdriver(+).
Setting up your French Door Refrigerator
Reassembling the fridge door
1. Insert and tighten the screw into
the left and right middle hinges
with a philips screwdriver(+).
2. Insert and tighten the 2 hex head
bolts into the left and right middle
hinges with an allen wrench(3/16”).
3. Replace the middle hinge cap.
4. Place the hole in the bottom of
the left d oor over the middle
hinge.
ground
wire
Top Table
12_ setting up
setting up
_13
01