Filter
Top Products
setting up _13
01 SETTING UP
Insert and tighten the 2 hex head bolts into the 2.
left and right middle hinges with an allen
wrench(3/16”).
Replace the middle hinge cap.3.
Place the hole in the bottom of the left d oor 4.
over the middle hinge.
Position the top table in place. Insert and 5.
tighten the 3 screws into the top table with a
philips screwdriver(+).
Insert the left upper hinge shaft into the hole on 6.
Top Table
the corner of the fridge door.
Insert the upper hinges into the holes at the top 7.
of the door.
Insert and tighten the 3 hex head bolts into the
left and right upper hinges with a socket
wrench.
htiw sedis htob morf stlob daeh xeh 4 evomeR 3.
a socket wrench(10 mm).
Reassembling the fridge door
Insert and tighten the screw into the left and 1.
right middle hinges with a philips screwdriver(+).