Filter
Top Products
Safety information _03
This appliance should be positioned in such a •
way that it is accessible to the power plug.
Failing to do so may result in an electric shock -
or fi re due to electric leakage.
Keep ventilation opening in the appliance •
enclosure or mounting structure clear of
obstruction.
Do not attempt to repair, disassemble, or •
modify the appliance yourself.
Do not use any fuse(such as cooper, steel wire, -
etc.) other than the standard fuse.
hen repairing or reinstalling the appliance is -
required, contact your nearest service center.
Failing to do so may result in an electric shock, -
fi re, problems with the product, or injury.
To get the best energy effi ciency of this •
product, please leave all selves, drawers and
baskets on their original position like as above
illustration.
Never unplug your refrigerator by pulling on the •
power cord. Always grip plug fi rmly and pull
straight out from the outlet.
Damage to the cord may cause a short-circuit, -
fi re and/or electric shock.
Do not use aerosols near the refrigerator.•
Aerosols used near the refrigerator may cause -
an explosion or fi re.
Do not install this appliance near a heater, •
infl ammable material.
Do not install this appliance in a humid, oily or •
dusty location, in a location exposed to direct
sunlight and water (rain drops).
Do not install this appliance in a location where •
gas may leak.
This may result in an electric shock or fi re. -
• This refrigerator must be properly
installed and located in accordance with
the manual before you use it.
Connect the power plug in the proper position •
with the cord hanging down.
If you connect the power plug upside down, -
the wire can get cut off and cause a fi re or
electric shock.
When moving the refrigerator, be careful not to •
roll over or damage the power cord.
This constitutes a fi re hazard. -
Make sure that the power plug is not squashed •
or damaged by the back of the refrigerator.
Keep the packing materials out of reach of •
children.
There is a risk of death from suffocation if a -
child puts the packing materials on his or her
head.
The appliance must be positioned so that the •
plug is accessible after installation.
You need to remove all the protective plastic •
fi lm before you initially plug the product in.
• The refrigerator must be safely
grounded.
Always make sure that you have -
grounded the refrigerator before
attempting to investigate or repair any
part of the appliance. Power leakages
can cause severe electric shock.
Never use gas pipes, telephone lines or other •
potential lightning attractors as an electrical
ground.
Improper use of the grounding plug can result -
in a risk of electric shock. If it is necessary
to use an extension cord, use only a 3-wire
extension cord that has a 3-blade grounding
plug and a 3-slot receptacle that will accept
the plug on the appliance. The marked rating
of the extension cord should be AC115-120 V,
10 A, or more. If a grounding adapter is used,
make sure the receptacle box is fully grounded.
• If the power cord is damaged,
have it replaced immediately by the
manufacturer or its service agent.
INSTALLATION CAUTIONS
• Allow suffi cient space to install the
refrigerator on a fl at surface.
If your refrigerator is not level, the internal -
cooling system may not work correctly.
Keep the ventilation space in the appliance •
enclosure or mounting structure clear of
obstruction.
Allow the appliance to stand for 2 hours after •
installation.
We recommend you have installed this •
refrigerator by a qualifi ed technician or service
company.
Failing to do so may result in an electric shock, -
fi re, explosion, problems with the product, or
injury.
This appliance must be properly grounded.•
Do not ground the appliance to a gas pipe, •
plastic water pipe, or telephone line.
You must ground the refrigerator to prevent -
any power leakages or electric shocks caused
by current leakage from the refrigerator.
This may result in an electric shock, fi re, -
explosion, or problems with the product.
CAUTION