Filter
Top Products
08_
setting up
Setting up your French Door
Refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
Selecting the best location for the
refrigerator
A location with easy access to a water supply.
Choose:
t
A location without direct exposure to sunlight.t
A location with a level floor.t
A location with enough space for the t
refrigerator doors to open easily.
A location that allows sufficient space to the t
right, left, back and top for air circulation.
A location that allows you to move the t
refrigerator easily if it needs maintenance or
service.
If the refrigerator does not have enough space,
the internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.
When you install the refrigerator next to a fixed
wall, you need a minimum clearance of 3 ¾”
(95mm) between the refrigerator and wall to allow
the door to swing open.
Important: Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung French Door Refrigerator.
Allow clearance to the right, left, back and top t
when installing. This will help reduce power
consumption and keep your energy bills lower.
Do not install the refrigerator where the t
temperature will go below 50ºF (10ºC).
Do not locate the refrigerator where it may t
become wet.
When moving your refrigerator
To prevent floor damage, be sure the front
adjusting legs are in the up position (above
the floor). Refer to ‘Adjusting the Level’ in
the manual (on page 9).
3 inches
3/4
2 inches
2 inches
B
A
C
E
D
B
A
C
E
D
Flat-blade screw
driver(-)
Control Lever
CAUTION
DA68-02601A(EN+FR+ES)-0.2.indb 6 2012.3.31 9:49:31 AM
Model
Depth “A” 33 27/32” (860mm)
Width “B” 35 25/32” (909mm)
Height “C” 68 3/8” (1737mm)
Overall Height “D” 70” (1778mm)
Depth “E” 36 7/32” (920mm)
RF263T** / RF263B** / RF263N**
RF261B**/ RF260B**