Filter
Top Products
22
Part Name How To Do Descriptive Picture
3-2) Refrigerator Door
DISASSEMBLY AND REASSEMBLY
Refrigerator
Door
1. With the door opened, remove
the Top Table cap() with a Flat
head screwdriver, and close the
door.
3. Disconnect a earth wire(),
electronic connector() and a
water()coupling .
The blue and red clips are not
on the coupling at first, but must
be put at installation().
Remove the 3 hex head bolts on
the upper hinge with 10mm
wrench.
2. Remove the 3 screw holding
down the Top Table and remove
the Top Table().
4. Remove the 3 hex head bolts()
found attatched to the upper left
and right door hinges with a
Wrench(10mm).
With a Philips head screwdriver,
remove the ground screw() found
attatched to the upper left and right
door hinges. Remove the upper left
and right door hinges().