Filter
Top Products
22_ Operating
USING THE DIGITAL DISPLAY
“Freezer Temp” indicates the current Freezer temperature.
“Fridge Temp” indicates the current Refrigerator temperature.
When not in use the Display will turn off, this is normal.
Power Freeze
This icon will light up when you activate the “Power Freeze” feature. “Power Freeze” is great when you
need a lot of ice.
When you have enough ice, just press the button again to cancel the “Power Freeze” mode.
If you select “Power Freeze”, the inside temperature of the Freezer will decrease for about two and a half
hours.
Cubed Ice , Crushed Ice , Water
Enjoy cubed or crushed ice by selecting your preference from the digital control panel. If you don’t
need ice, turn the feature off to save on water and energy consumption. The Ice type light indicates the
type of ice(or no ice) that is currently chosen.
Power Cool
This icon will light up when you activate the “Power Cool” button. For a quick fridge cool down, use
“Power Cool”.
If you select “Power Cool”, the inside temperature of the Fridge will decrease for about two and a half
hours.
Filter Indicator
When the filter indicator light is on, it is time to change the filter. Typically this happens about every 6
months.
The filter Indicator will be Blue when you initially insert the water filter.
The filter Indicator will be Light Pink when you have used your water filter for 5 months.
The filter Indicator will be Red when you have used your water filter for 6 months.
After removing the old water filter and installing a new one (see page 31 for instructions on how to do
this), reset the indicator by pressing and holding the “Ice/Water” button for 3 seconds.
Cancelling Exhibition Mode
In case of Exhibition Mode, It seems working but doesn’t make cool air. To cancel this mode, press Power
Freeze and Freezer Temp. buttons at the same time for 8 seconds until “Ding-Dong” sounds off.
CAUTION