Filter
Top Products
Setting Up _9
Check the accessory list below.
Water filter
(DA29-00003B)
Hex wrench
(DA80-00002C)
Compression
fitting
(DA62-00305A)
Compression
nut
(DA74-00070B)
Fastener
(DA60-00143B)
01 SETTING UP
REMOVING THE REFRIGERATOR DOORS
If the Refrigerator is too large to pass through your doorway easily, you can remove the refrigerator doors.
Disassemble the Refrigerator doors
1. With the door opened, remove the Top Table cap
(
1
) with a Flat head screwdriver, and close the
door.
Remove the 3 screws holding down the Top Table
and remove the Top Table(
2
).
2. Disconnect the electrical connector(
3
) above the upper right
door hinge and the 3 electrical
connectors(
4
) above the upper left
door hinge.
Disconnect the water tube(
5
) by
pulling the tube fitting(
6
) apart as
shown in the picture.
Tools you will need
3
4
5
6
2
1
Philips screwdriver Wrench Allen wrench(3/16”)
Flat-blade screwdriver Pliers