Samsung RF26VAB Refrigerator User Manual


 
Setting up your French Door Refrigerator
GETTING READY TO INSTALL THE REFRIGERATOR
Congratulations on your purchase of the Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
SelectingthebestlocationfortheRefrigerator
• A
location with easy access to the water supply.
• A
location without direct exposure to sunlight.
• A
location with level (or nearly level) flooring.
A
location with enough space for the Refrigerator doors to
open easily.
Allow sufficient space for air circulation of the internal
cooling system.
If the Refrigerator does not have enough space, the internal cooling
system may not work properly.
8_ Setting Up
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
Allow clearance to the right, left, back and top when installing. This will help reduce power
consumption and keep your energy bills lower.
DonotinstalltheRefrigeratorwherethetemperaturewillgobelow50ºF(10ºC).
CAUTION
When installing, servicing, or cleaning behind the refrigerator, be
sure to pull the unit straight out and push back in straight after
finishing.
Also, make sure your floor supports the full-load regrigerator.
Otherwise, it may cause floor damage.
Depth
MODEL
Capacity(Cu.Ft)
Dimensions
(inch)
Width
Case Height
with Hinge
without Hinge
with Handle
without Door
RF26VAB
26
35 ¾
70
68
35
29
SETTING UP THE REFRIGERATOR
Now that you have your new Refrigerator installed in place, you are ready to set up and enjoy the features and functions of
the appliance. By completing the following steps, your Refrigerator should be fully operational.
1. Place the Refrigerator in an appropriate location with reasonable clearance between the wall and the
Refrigerator. Refer to installation instructions in this manual.
2. Once the Refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the Temperature control to the coldest temperature and wait for an hour. The Freezer will get slightly chilled
and the motor will run smoothly.
4. After powering the Refrigerator, it will take a few hours to reach the appropriate temperature. You can store
food and drinks in the Refrigerator after the temperature is sufficiently cool.