Filter
Top Products
operating _21
02 OPERATING
( 7 )
Sparkling
Water
( Hold 3 sec
for Cylinder
Reset )
- If you change the carbonation level
when the refrigerator is making
sparkling water, the refrigerator
produces sparkling water at the
previous carbonation level.
3) To activate the Cylinder Reset Function
After you change CO
2
cylinders, press the
Sparkling Water button for three seconds
to activate the Cylinder Reset function.
When you activate the Cylinder Reset
function, the refrigerator starts making
sparkling water.
If you activate the Cylinder Reset function
when the Sparkling Water Production
function is OFF, the Sparkling Water
Production OFF Icon turns off and the
Carbonation Level icons light up in
rotation (Level-1 → Level-2 → Level-3
→ Level-1, etc.), indicating that the
refrigerator is making sparkling water.
While the refrigerator is making sparkling
water, it will not dispense sparkling water.
If you set the Sparkling Water Production
function to OFF within several seconds
after activating the Cylinder Reset
function, the Sparkling Water Production
OFF Icon turns on and the refrigerator
does not make sparkling water.
Sparkling water that is produced as the
result of activating the Cylinder Reset
function may have a carbonation level
higher than the current Carbonation Level
setting. If you want accurate carbonation
level in the next production, you need
to empty the tank before you start
production.
( 8 )
Cubed /
Crushed
(Hold 3
sec for
Sparkling
On/Off)
The Cubed/Crushed button serves two
purposes:
- To select the type of ice you want
dispensed.
- To turn the Sparkling Water Production
Function on and off.
1) To Select the type of ice
Press the Cubed/Crushed button to select
the type of ice you want dispensed.
Each time you press the button, the
cubed and crushed ice modes alternate
and the Cubed or Crushed ice icon lights
up, indicating your selection.
2) Sparkling Water Production Function
On / Off
Each time you press this button for 3
seconds, you turn the Sparkling Water
Production function on or off. When you
turn on the Sparkling Water Production
function, the refrigerator begins to make
sparkling (carbonated) water.
(If you turn off the Sparkling Water
Production function a few seconds after
turning it on, sparkling water production
will terminate. If more than a few seconds
pass, the refrigerator will start producing
sparkling water. While the refrigerator
is producing sparkling water, it won’t
dispense sparkling water.)
When you turn off the Sparkling Water
Production function, the “OFF” Icon on
the Display Panel turns on.
When you turn on the Sparkling Water
Production function, the “OFF” Icon on
the Display Panel turns off. When the
Sparkling Water Production function is off,
the refrigerator does not make sparkling
water.
If you turn off the function when the
refrigerator is in the middle of making
sparkling water, it halts the function after
finishing the current operation.
Your refrigerator was manufactured with
the Sparkling Water Production function
set to “OFF”. When you are connecting
the water lines, or mounting or replacing
the CO
2
Cylinder, turn off the Sparkling
Water Production function before you
begin. Turn on the function only after you
have completed the work.
To produce sparkling water, you must
install a CO
2
Cylinder. For instructions, see
Installing and Using CO
2
Cylinders.
DA68-02894A-09.indb 21DA68-02894A-09.indb 21 2013. 12. 3. 8:452013. 12. 3. 8:45