Filter
Top Products
38_ operating
RECOMMENDED LOCATION
FOR THE FOLDABLE SHELF
The Foldable Shelf folds up from the center, giving
you more storage area for tall items without your
having to re-arrange the shelves.
• Install the Foldable Shelf on the right side of
the refrigerator.
• If you install the Foldable Shelf on the left side,
the ice maker will prevent the shelf from folding
completely.
• To use, push the front portion of the shelf
back gently so that the shelf folds up from the
middle.
REMOVING THE
REFRIGERATOR
ACCESSORIES
1. Door Bins
• Door Bins (1)
To remove - Simply lift the bin up and pull
straight out.
To relocate - Slide it in above the desired
location and push down until it stops.
• Door Bins (2)
To remove - Take the right side of the bin
out by lifting it at an angle along the guide,
and then take the left side out by pulling it
from the door.
To relocate - Slide it into the original location
and push down until it sticks.
• Sparkling Water Model Door Bins (2)
To remove - Take the right side of the bin
out by lifting it at an angle along the guide,
and then take the left side out by pulling it
from the door.
To relocate - Align the positions of the Door
Bin’s holes carefully, and then slide the bin in
above the desired location and push down
until it stops.
- When removing and re-assembling the Bottom
Door Bin of the Sparkling Water model, open
the Cylinder Cover and tilt the Cylinder towards
the front first.
• Sparkling Water Model Door Bins (3)
Do not remove Sparkling Water model door
bin (3). To clean, wipe it completely with a
clean cloth without removing it.
Do not remove door bins (3).
Do not adjust a bin full of food.
Remove the food first.
To remove dust from the bins, remove the guard
and wash in water.
Injuries can occur if large bottles in the
bottom door bins fall over when you open
the doors. Open the doors carefully.
Injuries can occur if the door bins are not
firmly connected to the doors.
Do not allow children to play with the bins. Sharp
corners of the bins may cause injury.
2. Tempered Glass shelves
To remove - Tilt up the front of the shelf in the
direction shown ( 1 ) and lift it up vertically ( 2 ).
Pull the shelf out.
To re-install - Tilt the front of the shelf up and
guide the shelf hooks into the slots at a desired
height. Then lower the front of the shelf so that the
hooks can drop into the slots.
The Tempered Glass shelves are heavy.
Use special care when removing them.
CAUTION
CAUTION
CAUTION
1
2
3
1
2
touch
touch
Recommended
Recommended
Location
DA68-02894A-09.indb 38DA68-02894A-09.indb 38 2013. 12. 3. 8:452013. 12. 3. 8:45