Samsung RF323TEDBSR Refrigerator User Manual


 
operating _13
02 OPERATING
( 9 ) Ice Off
If you don’t want to make more ice,
touch the Ice Off button.
The icon will light up and the Ice-Maker
stops making ice.
We recommend you to stop ice
making if the following occur:
-
There is enough ice in the ice bucket.
-
You want to save water and energy.
- Water is not being supplied to
the refrigerator.
If the ice maker function is
ON, and the water Line is not
connected, there will be a water
valve noise from the back of the
unit. press the Ice Off (Hold 3sec
for child lock) button for less
than 3 seconds until the Ice Off
Indicator ( ) illuminates.
The function key will operate after you remove
your finger from the letters except E.Saver, Ice
and Water key.
( 10 ) Filter Water filter usage
This icon will light up when you need to
change the filter. After you use about
300 gallons of water, the filter indicator
lights up. (about 6 months). After you
install the new water filter, reset the filter
indicator by touching the Alarm/hold 3
sec for Filter Reset button.
If water is not dispensing or
dispensing slowly, you need to
replace the water filter because
the water filter is clogged.
Some areas have large amounts
of lime in their water, which
causes the water filter to clog
more quickly.
CHANGING THE WATER FILTER
To reduce risk of water damage to your
property DO NOT use generic brands
of water filters in your SAMSUNG
Refrigerator.
USE ONLY SAMSUNG BRAND WATER FILTERS.
SAMSUNG will not be legally responsible for any
damage, including, but not limited to property
damage caused by water leakage from the use of
a generic water filter. SAMSUNG Refrigerators are
designed to work ONLY WITH SAMSUNG Water
Filter.
The Filter light turns red to let you
know when it is time to change your
water filter cartridge.
To give you time to get a new filter,
the red light comes on just before the
capacity of the current filter runs out. Changing
the filter on time provides you with the freshest,
cleanest water from your refrigerator.
1. Shut off the water supply. Then, turn the water
filter ( 1 ) about 1/4 turn, counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily,
shut off the water supply valve.
Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick. If you are having difficulties, grip the
water filter firmly and pull it hard.
When you pull the
water filter, a little
water can leak from
the opening. This is
normal. To minimize
the water leaks, keep
the filter cartridge horizontal when you pull it.
To prevent overflow, empty the water filter tray
( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until it
locks.
• If you have trouble inserting the water
filter because of high water pressure,
shut off the water supply valve.
• The locked symbol should be lined up
with the indicator line.
WARNING
(Red)
2
1
3
2
4
DA68-02603A-03.indb 13 13. 4. 25. �� 2:12