Filter
Top Products
16_ operating
freezer ice bin if you need more ice cubes.
• If ice doesn’t come out, pull out the ice bucket
and press the test button located on the right
side of ice maker. See the illustration below.
• Do not press the test button continuously
when the tray is filled with ice or water. Water
may overflow or ice may jam the bucket.
Making Ice
• To fill the ice bucket to maximum capacity after
installation, follow these steps:
1. Allow your refrigerator to operate and cool
down for 24 hours (or 1 full day).
- Waiting 24 hours will allow your ice maker to
cool properly.
2. Dispense 4 to 6 ice cubes into the glass.
3. After 8, and then 16 hours, dispense a full
glass of ice.
• When you press the Test button on the
icemaker, you will hear the refrigerator chime
(ding-dong). When the chime sounds, release
the Test button.
• The chime sounds automatically again to let
you know the ice maker is working well.
If you want to remove the ice cubes without
using the ice bucket, please turn the ice
maker off. (However, remove the front cover
from the ice maker.) The ice cubes in the
ice maker can spill out over the drawer.
Do not put food in the ice bucket. If you store
food in the ice bucket, the food may get in the
way of the ice maker while opening/closing
the door, causing damage to the ice maker.
Note that the ice cubes in the ice bucket
may spill out over the drawer when
removing the ice bucket from the drawer.
If this is the case, be sure to clear the ice
cubes that spilled out of the drawer.
If a power failure occurs, ice cubes may
melt then freeze together when the power
comes back on, causing the dispenser to
be out of order.
To prevent this problem, after a power failure, pull out
the ice bucket and discard the residual ice or water.
If you use all the ice at once, you must
repeat Steps 2 and 3 above.
However, only wait 8 hours before dispensing the
first 4 to 6 ice cubes. This will replenish the ice
cubes and ensure maximum ice production.
Using the ice off Function
When you select the Ice Off mode, remove all ice
cubes from the bucket. If you are not using the ice
dispenser, the ice cubes may clump together.
Keep pushing button. Remove bucket as arrow
direction. Throw away the ice cubes or clumped
ice. Push the bottom of the bucket until you hear
a click. When the bucket does not fit, turn the
helix by 90 degree and try again.
• Use only the ice maker provided with
the refrigerator.
• The water supply to this refrigerator
must only be installed/connected by a
suitably qualified person.
• Connect to a potable water supply only.
• To operate the ice maker properly, water
pressure of 20 ~ 125 psi is required.
Going on vacation...
If you have a long vacation or business trip and won’t
use the water or ice dispensers for a long time:
- Close the water valve. Otherwise, water
leakage may occur.
- Remove all food.
- Unplug the refrigerator.
- Wipe excess moisture from inside and leave
the doors open. Otherwise, odor and mold
may develop.
Ice Maker Do’s and Don’ts
Do not put your fingers, hands or any other
unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material
damage. Never put your finger or any other
objects in the dispenser opening.
- It may cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with water
while it is in the refrigerator. Remove it to clean it.
When you insert the Ice maker tray, be sure
that the tray is well centered at the entrance.
Otherwise, the tray may be stuck.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
check the
water level
Test button
DA68-02603A-03.indb 16 13. 4. 25. �� 2:12