Filter
Top Products
54
INSTALLING AND STARTING THE HomePAD
TM
Unfold your HomePAD
TM
on the
stretch stand (When not using
HomePAD
TM
on the refrigerator cabi-
net) and pull out its stand.
Connect the power cables
• Connect AC adapter to the HomePAD
TM
.
• Connect AC plug to wall outlet
Lamp On
Lamp On On System and network are working properly
Lamp off
Off
Adapter power is off and the battery is discharged
Lamp blinking fast Blinking Fast Rebooting after power off
Lamp On
Blinking
System working normally but wireless network
not working
Lamp Blinking
Fast
Off
System is in power off mode
-
Adapter Power is on and the battery is fully
recharged.
Power Display Lamp
Network Display
Lamp
Remark
Please follow the Touch Screen instruc-
tions to correct its response system.
• This option screen appears only for initial
start-up.
• Press the screen point in sequence: 1->2-
>3->4->5(refer to UI Manual Screen setting),
This option only appears during initial startup.
• This process corrects the touch screen when
it is not responding to your screen input.
• Press each point on the LCD screen lightly
with the input pen to correct the Touch
Screen.
After Screen setting, Logging_In Process
will start.(refer to UI Manual Logging_In
process)
• This option only appears during initial start-up
Stand
Outlet
• When power is on, power and network display lamp will blink. System will initialize in 20
seconds. Touch Screen to correct touch point will display.
Press the power button of HomePAD
TM
The Display lamp status according to system conditions