Filter
Top Products
setting up _13
Removing the freezer door
A few things to mention first.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires
2
.
2. Remove hinge bolts
3
and a ground screw
4
counter-clockwise, and take o the upper hinge
5
in the direction of the arrow. Be careful when removing the door to ensure that it does not fall
on you.
3.
Remove the door from the lower hinge
6
by carefully lifting the door
7
.
4. Remove the lower hinge
8
from the lower hinge bracket
9
by lifting the lower hinge in the
direction of the arrow.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
01 SETTIN g UP
2
1
4
5
7
8
9
3
6
Is necesary two people for disassembling doors.
Be careful, no damage sensor harness with cover hinge.
Pressing
Before remove the bolts, disassembling Cover Leg front and hoses.