Samsung RS261MDPN Refrigerator User Manual


 
16_ setting up
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review the
previous section on levelling the refrigerator.


In the case of the process to correct the imbalance is the same. Open the doors and adjust them,
one at a time, as follows:
 Unscrew the nut
1
from the lower hinge until it reaches the upper end of the bolt
2
.
When you release the nut
1
, make sure that you use the hex wrench provided
3
to loosen the
bolt
2
in a counter-clockwise direction. You should then be able to unscrew the nut
1
with your fingers.
 Adjust the height difference between the doors by turning the bolt
2
clockwise or counter
clockwise .
When you turn clockwise , the door will move up.
 After adjusting the doors, turn the nut
1
clockwise until it reaches the lower end of the
bolt, then tighten the bolt again with the wrench
3
to fix the nut in place
1
.
If you do not secure the nut firmly, the bolt may release.
setting up your side-by-side refrigerator
3
2
1




3
2
1



3
2

