10_ setting up
setting up your side-by-side refrigerator
SETTING UP THE REFRIGERATOR DOORS
If your entrance won’t allow the refrigerator to pass easily through it, you can remove the doors.
Removing the Front Leg Cover
First, open both the freezer and refrigerator doors, and then take off the front leg cover by turning the
three screws counter-clockwise
Separating the Water Supply Line from the Refrigerator
Remove two water lines(gray one is for ice and the other one is for water)by pressing the coupler
1
and pulling the water line
2
away.
Reattaching the Water Supply Line
1. The Water Line must be fully inserted to
the marked line to prevent water leakage
from the dispenser.
2. Insert the 2 clips in the install
pack and check that each clip
holds the line firmly.
Do not cut the water line. Gently separate it from the coupler.
1
2
Make sure the color of the
water lines match.
clip A
(¼”)
clip A
(¼”)
DA99-01746B(EN-1)-GGH-0.6.indd 10 2010.7.7 4:37:3 PM