Filter
Top Products
14_ setting up
MAKING MINOR ADJUSTMENTS TO THE DOORS
Remember, a level refrigerator is necessary for getting the doors perfectly even. If you need help, review
the previous section on levelling the refrigerator.
In the case of the process to correct the imbalance is the same. Open the doors and adjust them,
one at a time, as follows:
Unscrew the nut
1
from the lower hinge until it reaches the upper end of the bolt
2
.
When you release the nut
1
, make sure that you use the Allen wrench provided
3
to loosen
the bolt
2
in a counter-clockwise direction. You should then be able to unscrew the nut
1
with your fingers.
Adjust the height difference between the doors by turning the bolt
2
clockwise or counter
clockwise
.
When you turn clockwise
, the door will move up.
After adjusting the doors, turn the nut
1
clockwise until it reaches the lower end of the
bolt, then tighten the bolt again with the wrench
3
to fix the nut in place
1
.
If you do not secure the nut firmly, the bolt may release.
3
2
1
Adjustment part
3
2
1
3
2
DA99-01746B(EN-1)-GGH-0.6.indd 14 2010.7.7 4:37:13 PM