Filter
Top Products
setting up _11
Removing the freezer door
A few things to mention first.
Make sure that you lift the door straight up so the hinges are not bent or broken.
Be careful not to pinch the water tubing and wire harness on the door.
Place doors on a protected surface to prevent scratching or damage.
With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
Remove hinge screws
4
and the ground screw
5
by turning counter-clockwise, and take off
the upper hinge
6
. Be careful that the door does not fall on you as you are removing it
Next, remove the door from the lower hinge
7
by carefully lifting the door straight up
8
.
Remove the lower hinge
9
from the bracket
10
by gently
lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order
01 SETTING UP
7
2
1
Be careful not to pinch
the water tubing and
wire harness on the
door.
4
5
6
Be sure to keep track of all
parts you are removing.
8
10
9
DA99-01746B(EN-1)-GGH-0.6.indd 11 2010.7.7 4:37:6 PM