Filter
Top Products
setting up _11
Removing the freezer door
A few things to mention fi rst.
• Make sure that you lift the door straight up so the hinges are not bent or broken.
• Be careful not to pinch the water tubing and wire harness on the door.
• Place doors on a protected surface to prevent scratching or damage.
1. With the Freezer door closed, remove the upper hinge cover
1
using a screwdriver, and then
disconnect the wires by gently pulling them apart
2
.
2. Remove hinge screws
4
and the ground screw
5
by turning counter-clockwise, and take off
the upper hinge
6
. Be careful that the door does not fall on you as you are removing it
3. Next, remove the door from the lower hinge
7
by carefully lifting the door straight up
8
.
4. Remove the lower hinge
9
from the bracket
10
by gently
lifting the lower hinge upwards.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order
01 SETTING UP
7
2
1
Be careful not to pinch
the water tubing and
wire harness on the
door.
4
5
6
Be sure to keep track of all
parts you are removing.
8
10
9