Samsung RSG257AARS Refrigerator User Manual


 
operating _21
02 OPERATING
operating the SAMSUNG side-by-side
refrigerator
USING THE ICE AND COLD WATER DISPENSER
Using the Water Dispenser
Press the Water button. Place your cup the water outlet and push
gently against the dispenser pad. Make sure the glass is in line with the
dispenser to prevent the water from splashing out.
To get cooler water
- The dispensed water is cool, not icy cold
- When you want colder water with ice, dispense ice to your drink glass
rst before fi lling it with water to prevent water from splashing out.
Using the Ice Dispenser
Press the Ice Type button to select the type of ice you want. Place your cup under the ice outlet and
push gently against the dispenser pad. Make sure the glass is in line with the dispenser to prevent
the ice from bouncing out. When Cubed Ice is selected after using the Crushed Ice feature, a small
amount of residual crushed ice might be produced.
Do not put your fi ngers, hands or any other unsuitable objects in the chute or ice-maker bucket.
- It may result in personal injury or material damage.
• Use only the ice maker provided with the refrigerator.
The water supply to this refrigerator must only be installed/
connected by a suitably qualifi ed person and connect to a
potable water supply only.
In order to operate the ice maker properly, water pressure
of 20~125 psi is required.
If you have a long vacation or business trip and won’t use
the water or ice dispensers, close the water valve.
- Otherwise, water leakage may occur.
When you have not used the Ice maker for a while, or you
have opened the Freezer door frequently, the Ice may stick
together. If this has occurred, empty the ice container or
break up the ice with a wood kitchen tool.
Do not use sharp items such as knives or forks.
When the bucket is removed, there may still be some residual ice in the ice maker that will
be produced.
Push
WARNING
CAUTION
Ice Chute
Ice Bucket
Ice-Maker Cover
No Ice
Select this if you want to turn
the ice maker off.
When Ice Off blinks on the display panel,
reinsert the bucket and/or make sure it’s
installed properly.